Blitzworld - Made in UK
This is the rear tyre for the Ripster I buggy with the 8" rims, size 18 x 9.5 x8.
Supplied:each..
£30.00 Ex Tax: £25.00
45 Deg Hose with 83mm ID to fit onto Ford Zetec manifold.
Supplied:
each..
£26.34 Ex Tax: £21.95
90 Deg Hose with 83mm ID to fit onto Ford Zetec manifold.
Supplied:
each..
£26.34 Ex Tax: £21.95
This is the latest BEAST radiator with a water proof Spal fan, up-graded radiator rubber mounts and ..
£954.00 Ex Tax: £795.00
Beast Bonnet in pinseal finish, bolts onto the dash panel, and has a cut out for the filler cap (not..
£594.00 Ex Tax: £495.00
This is the latest plug and play dash board control panel that bolts to the fromt bonnet and plugs i..
£270.00 Ex Tax: £225.00
The BEAST FORD Zetec Gear Linkage cables are made for the FORD Zetec engine with the 5 Speed gearbox..
£197.94 Ex Tax: £164.95
Beast Bonnet in pinseal finish, bolts onto the dash panel, and has a cut out for the filler cap (not..
£59.94 Ex Tax: £49.95
NO LONGER AVAILABLE - see Joyrider buggy
Blitz 1 (fiat 126 based kit) The Blitz 1 buggy..
£0.00 Ex Tax: £0.00
The Blitz 1 manual gives you a complete guide to building the Blitz 1 buggy, it is a paper booklet w..
£9.95 Ex Tax: £9.95
The Blitz 2 manual gives you a complete guide to building the Blitz 2 buggy, it is a 11 page booklet..
£14.95 Ex Tax: £14.95
The Blitz 4x4 manual gives you a complete guide to building the Blitz 4x4, it is a 20 page plus book..
£14.95 Ex Tax: £14.95
Blitz KR2 - High Performance Road Legal Buggy Superseded - see Joyrider buggyThe Blitz KR2 has prove..
£0.00 Ex Tax: £0.00
Exclusive to Blitzworld
This is the latest Blitzworld CORBEAU embroidered race bucke..
£455.94 Ex Tax: £379.95
This a metallic catalytic converter suitable for the Vigilante buggy exhaust system.Supplied:ea..
£162.00 Ex Tax: £135.00
Hammerhead 150cc buggy uprated automatic choke unit, fits all GY6 150cc buggies Supplied:each..
£29.94 Ex Tax: £24.95
Hammerhead GTS Tow ball with addition drop pin option allows the buggy to tow a small light weight t..
£144.00 Ex Tax: £120.00
Hammerhead GTS Tow Hitch fixing plate, bolts to the back of the Hammerhead GTS buggy to take the dro..
£54.00 Ex Tax: £45.00
Howie tow electrics loom, plugs into the tow hitch onto the towing car, and then the Howie ligh..
£179.94 Ex Tax: £149.95
The Blitzworld Roof Spoiler is designed to fit the Howie Joyner 650cc buggy and is made by..
£299.94 Ex Tax: £249.95
Howie, Joyner 650cc Buggy tow ball unit just bolts onto the back of the buggy for towing a small tra..
£150.00 Ex Tax: £125.00
This is a front bumper suitable for the Blitz 2 buggy and is made from 42mm diameter tube. We recome..
£270.00 Ex Tax: £225.00
Joyrider Sport (Chassis Kit)Twin seat any engine Road Legal BuggyDesigned & Manufactured in..
£0.00 Ex Tax: £0.00
This is a fold away roof for the Outbak 4x4 jeep..
£354.00 Ex Tax: £295.00
Outbak lift off door frames, supplied 2 off Left & Right..
£150.00 Ex Tax: £125.00
The NEW 2017 / 2018 Blitzworld Vigilante Sport rear arm is laser cut out of 25mm plate and is weld..
£714.00 Ex Tax: £595.00
This is the latest plug and play dash board control panel that bolts to the front facier and pl..
£270.00 Ex Tax: £225.00
This is a complete mudguard set for the Renegrade buggy including fixing brackets, which attach to t..
£299.94 Ex Tax: £249.95
This is a plastic mudguard that fits the front and rear of the Renegrade buggy. The mudguards are st..
£29.94 Ex Tax: £24.95
This is a full set of mudguards for the Renegade Rascal Buggy. The front mudguards bolt onto the ste..
£354.00 Ex Tax: £295.00
This is a seat modification that includes swopping the Rascal Seats for the Ripster seats, which all..
£264.00 Ex Tax: £220.00
Extended twin locking flat fit seat runners to fit Corbeau or Cobra seats.Supplied:2 off - Runners f..
£77.94 Ex Tax: £64.95
2 off Gear change cables 2235mm o/all long with 1925 from adjustment bolt to adjustmaent bolt, M6 th..
£191.88 Ex Tax: £159.90
2 off Gear change cables 2000mm o/all long with M6 threaded ends. Both cables the same. Supplie..
£215.94 Ex Tax: £179.95
Vigilante Roof panel. This panel is supplied ready to trim and fit to the buggy. The panel is locate..
£299.94 Ex Tax: £249.95
Aluminium Custom built Fuel tank with built in swirl potThis is our latest Vigilante Sport Aluminium..
£450.00 Ex Tax: £375.00
Vigilante Aluminium floor is 4.5mm thick chequer plate, supplied drilled and countersunk for the sea..
£179.94 Ex Tax: £149.95
Due to the any engine options available for the Vigilante, we have developed a combined alumini..
£594.00 Ex Tax: £495.00
Vigilante Bike rear differentialThis is a great unit perfect for a bike engine set up giving a diffe..
£1,194.00 Ex Tax: £995.00
The Vigilante cable kit can attach to allmost any car engine, including some bike engines. The compl..
£252.00 Ex Tax: £210.00
The Vigilante engine Poly bush mounting kit uses 5 mounting points to hang the engine off the vigila..
£167.94 Ex Tax: £139.95
Vigilante Front Metal Plate, rivets to the front of the Vigilante buggy. Please call for colour opti..
£23.94 Ex Tax: £19.95
Vigilante front metal custom made bulk head, fits behind the pedal box and supplied bare metal. This..
£95.94 Ex Tax: £79.95
Vigilante NEW one piece front mudguard.Supplied:each...
£71.99 Ex Tax: £59.99
Vigilante front light weight springs 2.1/2" inside diameter by 10.5" long. These are a softer spring..
£59.94 Ex Tax: £49.95
Vigilante front springs 2.1/2" inside diameter by 12" long, we will rate the springs according to th..
£41.94 Ex Tax: £34.95
Front upper mudguard (lights not included).Supplied:each...
£95.94 Ex Tax: £79.95
NEW Blitzworld Integrated Vigilante gear lever assembly with cable supports built into base can be c..
£235.14 Ex Tax: £195.95
This is the inner wire cable which can be eaisly replaced if the outer casing is ok.Supplied:each..
£17.94 Ex Tax: £14.95
To make the chassis shine when powder coated a lacquer can be added, either a standard lacquer or a ..
£234.00 Ex Tax: £195.00
Showing -399 to -350 of 216 (5 Pages)